• Latest news

    Latest news

  • Latest news

    Latest news

Structural Concrete, Vol. 5, no. 3, September 2004

Modelling effect of corrosion on bond strength of plain bar reinforcement

T. Pregartner, Engineering Office Eligehausen & Asmus, Stuttgart, Germany
J. Cairns, School of the Built Environment, Heriot-Watt University, Edinburgh, UK
J. Ozbolt, Institute for Construction Materials, University of Stuttgart, Germany

In the present paper a simple approach to model the effects of corrosion on bond between plain bar reinforcement and concrete with the finite element method (FE method) is shown. With the combination of a non-linear FE-solver and a discrete bond model it is sufficient to simulate corrosion by radial expansion of a concrete cylinder. The bond model used accounts for the effects of confinement and stresses in the vicinity of the reinforcement bar. Hence the effects of corrosion could be investigated with this simple approach. The model is calibrated on pull-out tests with RILEM specimen. Calculations conducted on beam end specimen containing plain surface bars show a plausible agreement with test results and with results known from literature. 

fib postal address

Ch. du Barrage, Station 18
CH-1015 Lausanne
Switzerland

Contact

p : +41 21 693 27 47
f : +41 21 693 62 45
e : info@fib-international.org
w : www.fib-international.org

Follow fib

Subscribe our newsletter

News

Follow us on
           

Join the fib

Join the fib